Table of Contents
Advertisement
Programmable functions
Networking
The , and programmable
functions are only displayed if the re-
quirements for using Miele@home
have been met (see "Miele@home"
and "Before using for the first time").
Switching off WiFi
The network configuration should be
reset whenever a tumble dryer is being
disposed of or sold, or if a used
tumble dryer is being put into opera-
tion. This is the only way to ensure
that all personal data has been re-
moved and the previous owner will no
longer be able to access the tumble
dryer.
Turn the programme selector to Mo-
bileStart .
will light up on the time display of
the tumble dryer.
Touch the sensor control on the
tumble dryer and hold the sensor
control until the countdown on the
time display has finished.
appears on the time display.
- The WiFi is switched off.
- The WiFi connection will be reset to
the factory default setting.
A new connection setup has to be
carried out in order to use
Miele@home again.
88
RemoteUpdate
The RemoteUpdate function is used for
updating the software in your tumble
dryer. If an update is available for your
tumble dryer, it will automatically down-
load it. Updates will not be installed
automatically. They must be initiated
manually.
If you do not install an update, you can
continue to use your tumble dryer in the
usual way. However, Miele recom-
mends installing updates.
Running RemoteUpdate
Information about the content and
scope of an update will be provided in
the Miele app.
The message will appear on the time
display if an update is available.
You can install the update immediately
or postpone this until later. When the
tumble dryer is switched on again, you
will be reminded about the update.
Deactivate RemoteUpdate if you do not
want to install any updates.
The update may take several minutes.
Please note the following information
about the RemoteUpdate function:
- You will only receive a message when
an update is available.
- Once an update has been installed, it
cannot be undone.
- Do not switch off the tumble dryer
during an update. Otherwise, the up-
date will be aborted and will not be
installed.
Advertisement
Table of Contents
