Install The Magnetics Fans - Hypertherm XPR170 Replacement Part Procedures

1
Plasma Power Supply

Install the magnetics fans

1. Put the fan on the bracket as shown.
2. Use a 4 mm, hexagonal-socket wrench to install the 3 nuts
to attach the new magnetics fan to the bracket.
3. Put the bottom of the fan and bracket assembly into the
sheet metal tab.
4. Connect the fan wire connector.
5. Use a 10 mm, hexagonal-socket wrench to install the nut.
6. Install the front panel.
14 810410 Field Service Bulletin XPR170