Install The Consumables - Hypertherm powermax30 Operator's Manual

Install the consumables

I
The plasma arc comes on im me di ate ly when the torch trigger is
activated. Make sure the power is OFF before changing consumables.
O
To operate the T30v torch, it must have a complete set of consumable parts installed: a retaining
cap, nozzle, swirl ring and electrode. You may also use an optional deflector.
With the power switch in the OFF (O) position, verify that the torch consumables are installed
as shown.
Retaining cap
Deflector (optional, only included
with the deluxe carrying case).
powermax30
Operator Manual
PLASMA ARC CAN CAUSE INJURY AND BURNS
Electrode
Swirl ring
Nozzle
WARNING
INSTANT-ON TORCHES
Tighten only
by hand.
OPERATION
4-3