Configuration menu
If the adapter run has been initiated prior to
mounting or if an error message (F1, F2, F3) is
displayed, press the menu/boost button (E) and
the motor reverses to the "InS" position.
6
Configuration menu
If you connect the device to the Homematic IP
Access Point, you can comfortably adjust the
settings via the free Homematic IP app.
When using the radiator thermostat without Homematic
IP Access Point, you can select the following modes
via the configuration menu after set-up directly on the
device and adjust the settings to your personal needs. To
do this, proceed as follows:
By pressing and holding the menu button (E) for
•
approx. 2 s, you will be entering the configuration
menu.
•
Select the desired icon via the minus and plus
buttons (C + F) by pressing the menu button
briefly to change the settings of the different
menu items.
Press and hold down the menu button (E) (approx.
2 s) to get back to the previous level. The menu
automatically closes without applying changes if
there is no operation for more than 1 minute.
60