HomeMatic HmIP-eTRV-B-UK Mounting Instruction And Operating Manual page 54

Start-up
5.1.2 Teaching-in to the Access Point (alternative)
If you have already connected the device to
another Homematic IP device, you first have to
restore the factory settings of the device before
you can connect it to the Homematic IP Access
Point or another Central Control Unit CCU2/
CCU3 (see "10 Restore factory settings" on page
73).
First set up your Homematic IP Access Point via
the Homematic IP app to enable operation of
other Homematic IP devices within your system.
For further information, refer to the operating
manual of the Access Point.
You can connect the device either to the Access
Point or to the Homematic Central Control Unit
CCU2/CCU3. For detailed information, refer to the
Homematic IP User Guide, available for download
in the download area of www.homematic-ip.com.
To integrate the device into your system and to enable
control via the free Homematic IP app, you must teach-in
the device to your Homematic IP Access Point first.
To connect the device to the Access Point proceed as
follows:
• Open the Homematic IP app on your smartphone.
54