Select the menu item "Teach-in device".
•
•
Open the battery compartment by first pulling
the battery compartment cover (D) down and
then upwards (see figure 3).
•
Remove the insulation strip from the battery
compartment of the device. Teach-in mode
remains activated for 3 minutes.
You can manually start the teach-in mode for
another 3 minutes by pressing the system button
(B) shortly (see figure 5).
•
Your device will automatically appear in the
Homematic IP app.
•
To confirm, enter the last four digits of the device
number (SGTIN) in your app or scan the QR code.
Therefore, see the sticker supplied or attached to
the device.
•
Wait until the connection is completed.
If teaching-in was successful, the LED (B) lights
•
up green. The device is now ready for use.
•
If the LED lights up red, try again.
•
In the app, give the device a name and allocate
it to a room.
•
Close the battery compartment.
Start-up
55