Configuration Menu - HomeMatic HmIP-eTRV-B-2 Installation And Operating Manual

6

Configuration menu

When using the radiator thermostat without Homematic IP Access Point,
you can select the following modes via the configuration menu after set-
up directly on the device and adjust the settings to your personal needs.
To do this, proceed as follows:
By pressing and holding the menu button (G), you will be entering
•
the configuration menu.
Select the desired icon via the plus and minus buttons (E + F) by
•
pressing the menu button briefly to change the settings of the
different menu items.
Press and hold down the control wheel to get back to the previous
level. The menu automatically closes without applying changes if
there is no operation for more than 1 minute.
6.1
AUTO
6.2
MANU
6.3
Offset
6.4
Prg
6.5
6.6
6.7
If you connect the device to the Homematic IP Access Point, you
can comfortably adjust the settings via the free Homematic IP app.
If you have already adjusted the settings in the configuration menu
or if you have already connected the device to another Homematic
IP device, you first have to restore the factory settings of the device
before you can connect it to a Homematic IP Access Point or another
Central Control Unit CCU3 (see see „10 Restore factory settings" on
page 52).
Automatic mode
Manual operation
Offset temperature
Programming a heating profile
Operating lock
Date and time
Holiday mode
Configuration menu
43