Download Print this page

Advertisement

Quick Links

Revision 1
September 2005
X3
Owner's Manual
Record Serial Number Here
Batca Fitness Systems
Tel. (919) 255-1233
www.batcafitness.com
Date of Purchase
www.batcafitness.com
X3 Owner's Manual

Advertisement

loading
Need help?

Need help?

Do you have a question about the X3 and is the answer not in the manual?

Questions and answers

Summary of Contents for Batca X3

  • Page 1 Revision 1 September 2005 Owner’s Manual Record Serial Number Here Batca Fitness Systems Tel. (919) 255-1233 www.batcafitness.com Date of Purchase www.batcafitness.com X3 Owner’s Manual...
  • Page 2 Instructions Congratulations on the purchase of your new Batca X3. This gym will provide you with a lifetime of enjoyment to meet your strength training needs. Batca Fitness Systems strives to build the best quality multi-station gyms and to package these gyms in such a way to avoid any damage during shipping.
  • Page 3 BFC-50123 Ankle Strap BFU-10120 Back Pad With Lumbar BFU-10121 7" Upholstery Roller BFC-50125 Lat Bar BFC-50126 Short Bar BFU-10122 Large Upholstery Roller BFC-50127 Magnetic Weight Stack Pin BFU-10124 Mid Row Chest Pad BFU-10125 Lat Bar Pad www.batcafitness.com X3 Owner’s Manual...
  • Page 4 BFH-50175 Sleeve Insert BFH-50267 5/16"-18 Nylock (Black) BFH-50269 Warning Decal (Do Not Hang) BFH-50188 Snap Hook BFH-50273 X3 Exercise Chart BFH-50190 Rubber Donut BFH-50278 Silver Wrinkle Touch Up Paint BFH-50192 200lb Weight Stack Decals BFH-50280 1" Round Inner Plastic Cap...
  • Page 5 Leg Press Lockout to Free Floater Cable  9/16” Wrench Upholstery  3/4” Wrench  9/16” Ratchet  3/4” Ratchet  Allen Wrench Set ITEM NO. PART NUMBER DESCRIPTION BFU-10117 Large Bottom Pad  Tape Measure BFU-10120 Back Pad With Lumbar www.batcafitness.com X3 Owner’s Manual...
  • Page 6 Bolt Length Note: Bolt length is measured from the underside of the head of the bolt. Batca Fitness Systems X3 Owner’s Manual...
  • Page 7 X3 Owner’s Manual...
  • Page 8 Batca Fitness Systems X3 Owner’s Manual...
  • Page 9 X3 Owner’s Manual...
  • Page 10 CAB-10102-1 Ab to Low Pulley Cable CAB-10105 Lockout Free Floater to Free Floater Cable CAB-11010 Leg Press Lockout to Free Floater Cable CAB-10401 Foot Assist Cable CAB-11011 Mid Row Lockout to Weight Stack Cable Batca Fitness Systems X3 Owner’s Manual...
  • Page 11 HCS 3/8"-16 x 3" P5 BFH-50126 HCS 3/8"-16 x 3 1/4" P5 4 BFH-50146 3/8" Flat Washer (Black) 10 BFH-50157 3/8"-16 Nylock (Black) BFH-50202 3/4" Pulley Spacer All Flat Washers and Nylocks are 3/8" unless otherwise noted. www.batcafitness.com X3 Owner’s Manual...
  • Page 12 BFH-50126 HCS 3/8"-16 x 3 1/4" P5 8 BFH-50146 3/8" Flat Washer (Black) 16 BFH-50149 3/8"-16 Jam Nut (Zinc) BFH-50157 3/8"-16 Nylock (Black) BFH-50253 Beveled Leveler All Flat Washers and Nylocks are 3/8" unless otherwise noted. Batca Fitness Systems X3 Owner’s Manual...
  • Page 13 Align the Chest Pole, the Leg Ext/Curl Pole, the Mid-Row Pole, and the Shoulder Pole so that they each are plumb and standing up vertically as shown in Figure 4.  Wrench Tighten all hardware thus far as found in Steps 1-3, starting from the top of the gym and working to the bottom. Figure 4 www.batcafitness.com X3 Owner’s Manual...
  • Page 14 Guide Rod Holder BFH-50125 HCS 3/8"-16 x 3" P5 BFH-50146 3/8" Flat Washer (Black) 12 Optional Medical Weight Stack BFH-50157 3/8"-16 Nylock (Black) BFH-50190 Rubber Donut All Flat Washers and Nylocks are 3/8" unless otherwise noted. Batca Fitness Systems X3 Owner’s Manual...
  • Page 15 BFH-50128 HCS 3/8"-16 x 3 3/4" P5 BFH-50146 3/8" Flat Washer (Black) BFH-50157 3/8"-16 Nylock (Black) Figure 6A BFH-50171 Side Mounted Flange Bearing BFH-50210 Gas Spring All Flat Washers and Nylocks are 3/8" unless otherwise noted. www.batcafitness.com X3 Owner’s Manual...
  • Page 16 BFH-50157 3/8"-16 Nylock (Black) BFH-50171 Side Mounted Flange Bearing BFH-50173 3 1/2" Pulley BFH-50201 1/2" Pulley Spacer BFH-50202 3/4" Pulley Spacer BFH-50210 Gas Spring All Flat Washers and Nylocks are 3/8" unless otherwise noted. Batca Fitness Systems X3 Owner’s Manual...
  • Page 17 HCS 3/8"-16 x 3 1/4" P5 BFH-50129 HCS 3/8"-16 x 4" P5 BFH-50130 HCS 3/8"-16 x 4 1/4" P5 BFH-50146 3/8" Flat Washer (Black) BFH-50157 3/8"-16 Nylock (Black) Figure 8A All Flat Washers and Nylocks are 3/8" unless otherwise noted. www.batcafitness.com X3 Owner’s Manual...
  • Page 18 Part # Description BFM-10125 Upper Pec Arm Right BFM-10124 Upper Pec Arm Left BFM-10148 Pec Cam Right BFM-10147 Pec Cam Left BFH-50220 Threaded Collar All Flat Washers and Nylocks are 3/8" unless otherwise noted. Batca Fitness Systems X3 Owner’s Manual...
  • Page 19 Axle BFM-10103 Lower Pec Arm BFH-50130 HCS 3/8"-16 x 4 1/4" P5 BFH-50146 3/8" Flat Washer (Black) BFH-50157 3/8"-16 Nylock (Black) Figure 10A BFH-50200 Rubber Bumper All Flat Washers and Nylocks are 3/8" unless otherwise noted. www.batcafitness.com X3 Owner’s Manual...
  • Page 20 3/8"-16 Jam Nut (Zinc) BFH-50155 1/2"-13 Nylock (Black) BFH-50157 3/8"-16 Nylock (Black) BFH-50172 Pillow Block Bearing BFH-50251 1/2" Flat Washer Black BFH-50253 Beveled Leveler All Flat Washers and Nylocks are 3/8" unless otherwise noted. Batca Fitness Systems X3 Owner’s Manual...
  • Page 21 Step 12: Figure 12 Figure 12A Item # Part # Description CAB-10401 Foot Assist Cable BFH-50149 3/8"-16 Jam Nut (Zinc) BFH-50288 3/8" Nylock (Zinc) All Flat Washers and Nylocks are 3/8" unless otherwise noted. www.batcafitness.com X3 Owner’s Manual...
  • Page 22 Item # Part # Description BFM-10138 Chest Press Arm BFM-10146 Chest Press Pulley Holder Figure 13A BFH-50137 HCS 1/2"-13 X 3 1/4" P5 BFH-50155 1/2"-13 Nylock (Black) BFH-50251 1/2" Flat Washer (Black) Batca Fitness Systems X3 Owner’s Manual...
  • Page 23 BFM-10110 Chrome Pad Adjustment BFH-50121 HCS 3/8"-16 x 2" P5 BFH-50124 HCS 3/8"-16 x 2 3/4" P5 BFH-50146 3/8" Flat Washer (Black) BFH-50157 3/8"-16 Nylock (Black) BFH-50210 Gas Spring All Flat Washers and Nylocks are 3/8" unless otherwise noted. www.batcafitness.com X3 Owner’s Manual...
  • Page 24 HCS 3/8"-16 x 3" P5 BFH-50137 HCS 1/2"-13 X 3 1/4" P5 BFH-50127 HCS 3/8"-16 x 3 1/2" P5 BFH-50146 3/8" Flat Washer (Black) BFH-50157 3/8"-16 Nylock (Black) All Flat Washers and Nylocks are 3/8" unless otherwise noted. Batca Fitness Systems X3 Owner’s Manual...
  • Page 25 HCS 3/8"-16 1" P5 BFH-50125 HCS 3/8"-16 x 3" P5 BFH-50146 3/8" Flat Washer (Black) Figure 16A BFH-50147 3/8" Lock Washer (Black) 2 BFH-50157 3/8"-16 Nylock (Black) All Flat Washers and Nylocks are 3/8" unless otherwise noted. www.batcafitness.com X3 Owner’s Manual...
  • Page 26 High Pivot Roller BFM-10151 Low Pivot Roller BFH-50126 HCS 3/8”-16 X 3 1/4" P5 BFH-50146 3/8" Flat Washer Black BFH-50157 3/8"-16 Nylock (Black) BFH-50220 Threaded Collar All Flat Washers and Nylocks are 3/8" unless otherwise noted. Batca Fitness Systems X3 Owner’s Manual...
  • Page 27 Right Handle BFM-10109 Chrome Pad Adjustment BFH-50126 HCS 3/8”-16 X 3 1/4" P5 BFH-50146 3/8" Flat Washer (Black) BFH-50157 3/8"-16 Nylock (Black) BFH-50245 FHSCS 5/16"-18 x 1" All Flat Washers and Nylocks are 3/8" unless otherwise noted. www.batcafitness.com X3 Owner’s Manual...
  • Page 28 BFH-50146 3/8" Flat Washer (Black) BFH-50157 3/8"-16 Nylock (Black) BFH-50174 4 1/2" Pulley BFH-50201 1/2" Pulley Spacer Figure 19B BFH-50256 1/2" Jam Nut (Zinc) All Flat Washers and Nylocks are 3/8" unless otherwise noted. Batca Fitness Systems X3 Owner’s Manual...
  • Page 29 BFH-50157 3/8"-16 Nylock (Black) BFH-50174 4 1/2" Pulley BFH-50201 1/2" Pulley Spacer BFH-50227 Cable Strap Figure 20A BFH-50238 BFH-50239 Snap Ring BFH-50256 1/2" Jam Nut (Zinc) All Flat Washers and Nylocks are 3/8" unless otherwise noted. www.batcafitness.com X3 Owner’s Manual...
  • Page 30 1/2" Pulley Spacer BFH-50227 Cable Strap BFH-50250 1 1/4" Shoulder Bolt BFH-50256 1/2" Jam Nut (Zinc) BFH-50267 5/16"-18 Nylock (Black) BFM-50651 Cable Guard Spacer All Flat Washers and Nylocks are 3/8" unless otherwise noted. Batca Fitness Systems X3 Owner’s Manual...
  • Page 31 4 1/2" Pulley BFH-50201 1/2" Pulley Spacer BFH-50227 Cable Strap BFH-50250 1 1/4" Shoulder Bolt BFH-50256 1/2" Jam Nut (Zinc) BFH-50267 5/16"-18 Nylock (Black) All Flat Washers and Nylocks are 3/8" unless otherwise noted. BFM-50651 Cable Guard Spacer www.batcafitness.com X3 Owner’s Manual...
  • Page 32 4 1/2" Pulley BFH-50202 3/4" Pulley Spacer BFH-50227 Cable Strap BFH-50250 1 1/4" Shoulder Bolt BFH-50256 1/2" Jam Nut (Zinc) Figure 22A BFH-50267 5/16"-18 Nylock (Black) All Flat Washers and Nylocks are 3/8" unless otherwise noted. Batca Fitness Systems X3 Owner’s Manual...
  • Page 33 3/8" Flat Washer (Black) BFH-50157 3/8"-16 Nylock (Black) BFH-50174 4 1/2" Pulley Figure 23B BFH-50227 Cable Strap BFH-50250 1 1/4" Shoulder Bolt BFH-50267 5/16"-18 Nylock (Black) All Flat Washers and Nylocks are 3/8" unless otherwise noted. www.batcafitness.com X3 Owner’s Manual...
  • Page 34 3/8" Flat Washer Black BFH-50157 3/8"-16 Nylock (Black) BFH-50174 4 1/2" Pulley BFH-50227 Cable Strap Figure 24A BFH-50238 BFH-50239 Snap Ring BFH-50256 1/2" Jam Nut (Zinc) All Flat Washers and Nylocks are 3/8" unless otherwise noted. Batca Fitness Systems X3 Owner’s Manual...
  • Page 35 BFH-50146 3/8" Flat Washer (Black) BFH-50157 3/8"-16 Nylock (Black) BFH-50173 3 1/2” Pulley BFH-50174 4 1/2" Pulley BFH-50201 1/2" Pulley Spacer BFH-50256 1/2" Jam Nut (Zinc) All Flat Washers and Nylocks are 3/8" unless otherwise noted. www.batcafitness.com X3 Owner’s Manual...
  • Page 36 HCS 3/8"-16 x 2 3/4" P5 BFH-50146 3/8" Flat Washer (Black) BFH-50157 3/8"-16 Nylock (Black) BFH-50173 3 1/2" Pulley Figure 26A BFH-50174 4 1/2" Pulley BFH-50201 1/2" Pulley Spacer All Flat Washers and Nylocks are 3/8" unless otherwise noted. Batca Fitness Systems X3 Owner’s Manual...
  • Page 37 CAB-10105 Free Floater to Free Floater Cable 1 BFH-50124 HCS 3/8"-16 x 2 3/4" P5 BFH-50157 3/8"-16 Nylock (Black) BFH-50173 3 1/2" Pulley BFH-50201 1/2" Pulley Spacer BFH-50256 1/2" Jam Nut (Zinc) All Flat Washers and Nylocks are 3/8" unless otherwise noted. www.batcafitness.com X3 Owner’s Manual...
  • Page 38 6 1/2” Spring BFH-50622 Roller End Cap BFU-10117 Large Bottom Pad BFU-10118 Bottom Pad BFU-10119 Head Pad BFU-10120 Back Pad With Lumbar BFU-10121 7" Upholstery Roller BFH-50221 3" Plastic Washer BFH-50620 BHSCS 3/8”-16 x 1” P5 Batca Fitness Systems X3 Owner’s Manual...
  • Page 39 Arm. If improperly installed the Foot Assist Cables will rub the Foot Shroud during use and can cause damage and harm. Incorrect installation will void your warranty. Figure 28A Figure 28B Figure 28C Figure 28E Figure 28D www.batcafitness.com X3 Owner’s Manual...
  • Page 40 All Flat Washers and Nylocks are 3/8" unless otherwise noted. Figure 30C Item # Part # Description 200lb Stack (Standard) 175lb Stack (*Optional) BFH-50192 200lb Weight Stack Decals Figure 30A Figure 30B BFH-50258 175lb Weight Stack Decals Batca Fitness Systems X3 Owner’s Manual...
  • Page 41 Lat Bar Pad BFC-10101 1 inch Chain BFC-10102 12 inch Chain BFC-50122 Ab Strap BFC-50123 Ankle Strap BFC-50125 Lat Bar BFC-50126 Short Bar BFC-50127 Magnetic Weight Stack Pin All Flat Washers and Nylocks are 3/8" unless otherwise noted. www.batcafitness.com X3 Owner’s Manual...
  • Page 42 3/8" Flat Washer (Black) BFH-50149 3/8"-16 Jam Nut (Zinc) BFH-50157 3/8"-16 Nylock (Black) Figure 32 BFH-50253 Beveled Leveler All Flat Washers and Nylocks are 3/8" unless otherwise noted. Step 33: Figure 33A Figure 33B Batca Fitness Systems X3 Owner’s Manual...
  • Page 43 HCS 3/8"-16 X 3 1/4" P5 BFH-50146 3/8" Flat Washer (Black) BFH-50157 3/8"-16 Nylock (Black) BFH-50172 Pillow Block Bearing BFH-50249 1/2" Shoulder Bolt (3/8"-16x50mm) BFH-50251 1/2" Flat Washer Black All Flat Washers and Nylocks are 3/8" unless otherwise noted. www.batcafitness.com X3 Owner’s Manual...
  • Page 44 FHSCS 3/8"-16 X 2 1/4" BFH-50146 3/8" Flat Washer Black BFH-50147 3/8" Lock Washer (Black) BFH-50157 3/8"-16 Nylock (Black) BFU-10117 Large Bottom Pad BFU-10120 Back Pad With Lumbar All Flat Washers and Nylocks are 3/8" unless otherwise noted. Batca Fitness Systems X3 Owner’s Manual...
  • Page 45 3/8” Flat Washer (Black) BFH-50157 3/8”-16 Nylock (Black) BFH-50174 4 1/2" Pulley BFH-50201 1/2" Pulley Spacer BFH-50250 1 1/4" Shoulder Bolt Figure 35A BFH-50267 5/16"-18 Nylock (Black) All Flat Washers and Nylocks are 3/8" unless otherwise noted. www.batcafitness.com X3 Owner’s Manual...
  • Page 46 You will need to take some of the tension out to lower the Top plate flush with the second plate. Refer to Figure 19A, 20, and 21A. Refer to Figure 13A. Batca Fitness Systems X3 Owner’s Manual...
  • Page 47 Refer to Figure 19B and 22. Refer to Figure Refer to Figure 21. Refer to Figure Refer to Figure 27A www.batcafitness.com X3 Owner’s Manual...
  • Page 48 Free Floater, Lockout Free Floater, or the Top Plate of the weight stack. Each must also be secured with a 1/2” Jam Nut to ensure a safe and proper connection. Refer to Steps 19, 20, 21, 22, 24, 25, 27, and 35. See Figures below. Free Floater w/ Lockout Free Floater Top Plate Batca Fitness Systems X3 Owner’s Manual...
  • Page 49 All levelers must be threaded at least 1/2” into its respective part. Each must also be secured with a 3/8” Jam Nut to ensure a safe and proper connection. Step 2 Steps 19 and 22 Step 13 www.batcafitness.com X3 Owner’s Manual...
  • Page 50 Preventive Maintenance Batca Fitness Systems strives to give you the very best in quality, performance and safety through carefully engineered designs and excellent workmanship. In order to maintain this high level of quality the preventative maintenance schedule below should be followed.
  • Page 51 This warranty does not cover damage, which results from shipping, misuse, abuse, neglect, carelessness, mod- ification or alteration, accident, fire, flood, “acts of God” or other contingencies beyond the control of Batca Fit- ness Systems. This warranty also does not cover deterioration from wear and tear or exposure or any defect, which would not have happened if instructions in the owner’s manual had been followed.
  • Page 52 Layout Diagram The X3 without Leg Press has a layout dimension of 10’-0” (length) x 8’-10” (width) x 6’-11” (height). With the Leg Press the X3 measures 10’-6” (length) x 9’-4” (width) x 6’-11” (height). There should be a mini- mum of 18”, preferably 24”, of working space around the entire unit.