Pull Starter System Assembly - Vittorazi Motors Moster 185 Plus Maintenance Manual

3.9.3 Pull starter system assembly

If the washers are different, place the thinner ones first and then the thicker ones.
Insert the washers (6), the 2 hooks (5) and the spring of the hooks (4).to assemble the pulley
Position the pulley and the hooks according to the image below
check that the gap between spring and washers are is between 0.35 and 0.45 mm if not remove
the washers and use washers with different thickness.
Moster 185 Plus - Maintenance manual - V1 65