Crankcase; Crankcase Disassembly - Vittorazi Motors Moster 185 Plus Maintenance Manual

3.14 Crankcase

Bearings (M005)
Crankshaft (MP001) includes: nut
M10x1,25 (M037)
Components
Oil seals* (M006)
to replace
Crankcase (M002)
Three Bond 1215 silicone paste*
Extractor (ACC113).
Specific tool (ACC127).
Specific tool (ACC128).
Special tools
Screws M6x35/40: 10 Nm.
Screws M8x16: 20 Nm.
Values
*Always replace it when disassembled.

3.14.1 Crankcase disassembly

Before disassembling the crankcase, remove the airbox (3.3 Airbox), the carburettor (3.4
Carburettor), the reed valve (3.5 Reed valve), the exhaust system (3.7 Exhaust system), the
rubber mountings (3.8 Rubber mountings), the pull starter system (3.9 Pull starter system),
the electric starter (3.10 Electric starter), the flywheel, the coils (3.11 Flywheel, coils), the
transmission (3.12 Transmission) and the cylinder unit (3.13 Piston, cylinder, head).
Moster 185 Plus - Maintenance manual - V1
Time limit
150 h
on condition
150 h
on condition
150 h
118