Silencer Assembly - Vittorazi Motors Moster 185 Plus Maintenance Manual

3.7.6 Silencer assembly

Put high-temperature silicone (Loctite 5900) on the inside edge of the end caps (6, 9).
Wrap the sound-absorbing material (7) around the inner tube (6) then position them in the
silencer body (8).
Fix the end caps on the body with 8 rivets respecting the references taken during disassembly.
Make sure that the end caps are fully inserted before fixing.
Wet the rivets with high-temperature silicone (Loctite 5900) before fastening and fix the end
caps (6, 9) on the body.
Moster 185 Plus - Maintenance manual - V1 47