Vittorazi Motors Moster 185 Plus Maintenance Manual page 57

Replace the 3 self-locking nuts M8.
Insert the 2 rubber mountings of the exhaust system shown in the figure, the 2 self-locking nuts
M8 and tighten to 18 Nm.
Insert the exhaust system rubber mounting shown in the figure, the self-locking nut M8 and
tighten to 15 Nm.
RUBBER
14/20 SOFT
(M151a)
Moster 185 Plus - Maintenance manual - V1
RUBBER
14/14 HARD
(M151c)
57