Vittorazi Motors Moster 185 Plus Maintenance Manual page 35

Replace the gaskets (4).
Place the reed valve (5) with the gaskets (4) on the crankcase (6).
Insert the carburettor flange (3).
Position the accelerator cable holder (2) on the carburettor flange (3).
Insert the 4 Allen screws M5x25 (1) into the carburettor flange (3), tighten progressively, then with
the torque shown in the figure.
8 Nm
Moster 185 Plus - Maintenance manual - V1 35