Replace the nut M10x1,25 and the washer 10,5x18.
Insert the nut M10x1,25 with the washer 10,5x18 and tighten with the torque shown in the figure.
52 Nm
Insert the coil (3) and the 2 Allen screws M5x20 (1) with washers (2) without tightening.
Place 0,3 mm shims between the coil and the flywheel.
Tighten the coil screws by hand.
Remove the shims.
Moster 185 Plus - Maintenance manual - V1
85