How To Online Debug The Wp-2000-Ce7 Program - ICP DAS USA WP-2000-CE7 Series User Manual

A.1. How to Online Debug the WP-2000-CE7 Program
Here are step by step instructions on how to online debug the WP-2000-CE7 program.
Tips & Warnings
Before starting online debug the WP-2000-CE7 program, make sure that the WP-2000-CE7
SDK has been installed correctly.
For more information on how to install the WP-2000-CE7 SDK, please refer to 4.2. Installing
WP-2000-CE7 SDK.
Step 1: Copy the following files to the \System_Disk\icpdas\system on the WP-2000-CE7
By default, these files are located on the development computer at C:\Program
Files\Common Files\Microsoft Shared\CoreCon\1.0\Target\wce400\<CPU>.

clientshutdown.exe

CMAccept.exe

ConmanClient2.exe

eDbgTL.dll

TcpConnectionA.dll
Step 2: Run the ConmanClient2.exe and then CMAccept.exe on the WP-2000-CE7
WP-2000-CE7 Series (WinCE7 Based) User Manual v 1.0.4 Page: 134