1-2
Chapter 1: Module Overview
Section 1.2
Increased Accuracy
and Reliability
Section 1.3
Reduced System
Costs
Section 1.4 State-
of-the-Art
Performance
User's Manual Pub. 0300181-07 Rev. A
•
Input voltage ranges: AC (50mv–75V peak), 5 Vdc, 12 Vdc, 24 Vdc.
•
Input frequency: AC 50 kHz Max, DC 50 kHz Max.
•
Maximum count value: ±32 K or ±8 M.
•
Programmable Scaling, K, M, R Factor.
•
Channel update time of 4 msec/channel.
Rate output mode (Integer and Floating Point).
•
Counter logic level state.
•
Programmable Counter functions: start/stop/reset/present.
•
Programmable counter Alarm flags and zero flags.
•
3 Selectable filters: 15 kHz, 30 kHz, 50 kHz.
•
Channel to back Plane isolation of 1000 VDC.
•
The counter module offers
measurement accuracy. Programmable functions allow the user to define counter
ranges and flags to accommodate process-specific requirements. Full speed
counter operation of over 50kHz is
High Channel density allows for lower resource usage. Eight channels consume
the resources associated with a standard two channel module.
These modules incorporate state of the art Programmable Gate Array technology
that allows high circuit density and functionality. The module uses proprietary
Allen-Bradley technology, so they operate and perform like the latest Allen-
Bradley products. They also provide high resolution, user-programmable range
settings, continuous temperature compensation (no field calibration), software
configuration, programmable output limits, and programmable safe states in case
of a fault.
±
1 count accuracy and
possible.
±
1% or better frequency
Need help?
Do you have a question about the SLC 500 and is the answer not in the manual?