Page 4
INTERCHANGE CRESCENT Crescent 60” ..# 04157 Crescent 72” ..# 04156 FIGURE 1 STEP 1: Place the top on a clean,dry surface laminate side down, so that the predrill holes face up.
Page 5
INTERCHANGE CRESCENT Crescent 60” ..# 04157 Crescent 72” ..# 04156 FIGURE 2 *tip* stagger screws during assembly; i.e. fasten one screw into one of the legs, then another screw on the other leg.
Page 6
INTERCHANGE CRESCENT Crescent 60” ..# 04157 Crescent 72” ..# 04156 FIGURE 3 STEP 5: Rotate the T-Nut bracket 90º and insert into channel support.
Page 7
INTERCHANGE CRESCENT Crescent 60” ..# 04157 Crescent 72” ..# 04156 FIGURE 4 STEP 6: Adjust the leg height as desired by loosening the set screw in each leg (using the Allen Key provided).
Need help?
Do you have a question about the 04157 and is the answer not in the manual?
Questions and answers