Creating A Decompression Plan; Using Decompression Plans - Garmin DESCENT G1 Series Owner's Manual

Title
Identifier
Language
Description
Version
Revision
Changes
Status
Last Modified
Author

Creating a Decompression Plan

You can create open-circuit decompression plans and save them for future dives.
1 Press START.
2 Select Plan Dive > Deco Plans > Add New.
3 Enter a name for the decompression plan.
4 Select an option:
• To enter the maximum partial pressure of oxygen in bars, select PO2.
NOTE: The device uses the PO2 value for gas switching.
• To enter your level of conservatism for decompression calculations, select Conservatism.
• To enter your gas blends, select Gases.
• To enter the depth of your last decompression stop, select Last Deco Stop.
• To enter the maximum dive depth, select Bottom Depth.
• To enter the time at the bottom depth, select Bottom Time.
5 Select Save.
Title
Identifier
Language
Description
Version
Revision
Changes
Status
Last Modified
Author

Using Decompression Plans

1 Press START.
2 Select Plan Dive > Deco Plans.
3 Select a decompression plan.
4 Select an option:
• To view the decompression plan, select View.
• To use the decompression plan settings for a dive mode, select Apply.
• To change the decompression plan details, select Edit.
• To edit the name of the decompression plan, select Rename.
• To remove the decompression plan, select Delete >
Diving
Creating a Decompression Plan
GUID-7187F580-420E-457F-9C59-85F3D5AEB67B
EN-US
4
3
Added last deco stop option.
Released
10/02/2022 13:00:19
cozmyer
Using Decompression Plans
GUID-462C7946-DF7F-4FDA-AD48-7C488CEFEDAB
EN-US
4
3
Added options from the editing and deleting tasks
Released
10/02/2022 13:00:28
cozmyer
.
35