Dive Planning; Calculating Ndl Time; Creating A Decompression Plan; Viewing And Applying A Decompression Plan - Garmin IPH-A3095 Owner's Manual

Table of Contents

Advertisement

3
Select a dive.
4
Select an option:
• To view additional information about the activity, select
Details.
• To view additional information about one of multiple dives
in the activity, select Dives, and select a dive.
• To view the activity on a map, select Map.
• To view the depth profile of the activity, select Depth
Profile.
• To view the temperature profile of the activity, select
Temperature Profile.

Dive Planning

You can plan for future dives using your device. The device can
calculate no-decompression limit (NDL) times or create
decompression plans that you can save and use for a dive.

Calculating NDL Time

You can calculate the NDL time or maximum depth for a future
dive. These calculations are not saved or applied to your next
dive.
1
Select
> Plan Dive > Compute NDL.
2
Enter the oxygen percentage.
3
Select an option:
• To calculate the NDL time, select Enter Depth, and enter
the planned depth for your dive.
• To calculate the maximum depth, select Enter Time, and
enter your planned dive time.
The NDL countdown clock, depth, and maximum operating
depth (MOD) appear.
4
Select DOWN.
5
Select an option:
• To exit, select Done.
• To add intervals to your dive, select Add Repeat Dive,
and follow the on-screen instructions.

Creating a Decompression Plan

You can create decompression plans and save them for future
dives.
1
Select
> Plan Dive > Deco Plans > Add New.
2
Enter a name for the decompression plan.
3
Select an option:
• Select PO2 to enter the maximum partial pressure of
oxygen in bars.
• Select Conservatism to enter your level conservatism for
decompression calculations.
• Select Gases to enter your gas blends.
• Select Bottom Depth to enter the maximum dive depth.
• Select Bottom Time to enter the time at the bottom depth.
4
Select Save.

Viewing and Applying a Decompression Plan

You can replace the current dive settings with the settings from
a decompression plan.
1
Select
> Plan Dive > Deco Plans.
2
Select a decompression plan.
3
If necessary, select View to view the decompression plan,
then select BACK.
4
Select Apply to use the decompression plan settings.

Editing a Decompression Plan

1
Select
> Plan Dive > Deco Plans.
2
Select a decompression plan.
4
3
Select an option:
• Select Edit to change the decompression plan details.
• Select Rename to edit the name of the decompression
plan.
4
Edit the information.

Deleting a Decompression Plan

1
Select
> Plan Dive > Deco Plans.
2
Select a decompression plan.
3
Select Delete >
.

No-Fly Time

After a dive,
appears on the default watch face, along with a
no-fly time estimate in hours. You should not fly in an airplane
during this time.
TIP: You can add the no-fly indicator to a custom watch face
(Customizing the Watch Face, page

Tips for Wearing with an Exposure Suit

• Use the extra long silicone diving band to wear the device
over a thick exposure suit.
• Use the extension
on the titanium watch band to increase
the length of the band.
• For accurate heart rate measurements, make sure the
exposure suit does not interfere with the wrist-based heart
rate monitor
(Wearing the Device and Heart Rate, page

Activities

Your device can be used for indoor, outdoor, athletic, and fitness
activities. When you start an activity, the device displays and
records sensor data. You can save activities and share them
with the Garmin Connect community.
You can also add Connect IQ
your Garmin Connect account
For more information about activity tracking and fitness metric
accuracy, go to garmin.com/ataccuracy.

Starting an Activity

When you start an activity, GPS turns on automatically (if
required). When you stop the activity, the device returns to
watch mode.
1
From the watch face, select
2
Select an activity.
3
If necessary, follow the on-screen instructions to enter
additional information.
4
If necessary, wait while the device connects to your ANT+
sensors.
5
If the activity requires GPS, go outside, and wait while the
device locates satellites.
6
Select
to start the timer.
27).
activity apps to your device using
(Connect IQ Features, page
.
7).
23).
®
Activities

Advertisement

Table of Contents
loading

This manual is also suitable for:

Descent mk1

Table of Contents