Note: If you uploaded the default configuration file you may need to change the IP address
of your computer to be in the same subnet as that of the default PLA IP address
(192.168.1.2).
11.8 Re sta rt Sc re e n
System restart allows you to reboot the PLA without turning the power off.
Click
Ma inte na nc e > Re sta rt
Maintenance > Restart
Fig ure 41
Click
Re sta rt
11.9 L a ng ua g e Sc re e n
Use this screen to change the language for the Web Configurator.
Select the language you prefer and click
without restarting the PLA.
Maintenance > Language
Fig ure 42
11.10 Wi- Fi Mo de Sc re e n
The PLA offers three different Wi-Fi modes: Range Mode, Performance Mode and Mixed Mode. Use this
screen to change the Wi-Fi Mode on your PLA.
Chapter 11 Maintenance
to open the following screen.
to have the PLA reboot. This does not affect the PLA's configuration.
PLA5236 User's Guide
. The Web Configurator language changes after a while
Apply
62