Table of Contents
Advertisement
3.3 What You Need to Know
With the exception of the System Mode other configuration screens in Universal Repeater mode
are similar to the ones in Access Point Mode. See
3.3.1 Setting your WRE6505 to Universal Repeater Mode
To use your WRE6505 as a universal repeater, see
1
Connect your computer to the LAN port of the WRE6505.
2
Open a web browser such as Internet Explorer and type http://zyxelsetup as the web address in
3
your web browser.
Enter "1234" (default) as the password and click Login.
4
Type a new password and retype it to confirm, then click Apply. Otherwise, click Ignore.
5
Note: You have to log in to the Web Configurator again when you change modes. As soon
as you do, your WRE6505 is already in Universal Repeater mode.
Note: If a client is connected to the WRE6505 through the wired Ethernet connection, the
client can only access the 2.4 GHz Wi-Fi. In the following figure, the LAN Client is
only able to communicate with devices in the 2.4 GHz wireless network.
Figure 6 Repeater Mode Overview
5 GHz
2.4 GHz
3.4 Universal Repeater Mode Status Screen
Click
to open the Status screen.
Chapter 3 Universal Repeater Mode
Chapter 2 on page 12
Section 2.1.1.1 on page
5 GHz
WRE
2.4 GHz
LAN Client
WRE6505 User's Guide
15
of this User's Guide.
13.
5 GHz
5 GHz AP
2.4 GHz AP
2.4 GHz
Hide quick links:
Advertisement
Table of Contents
