▲ ▼ /+-) on the screen or controller , the speed will be adjusted; press INCLINE
When press SPEED (
▲ ▼ ), the incline will be adjusted. The user can also press the direct keys (3-6-9) on the controller or quick key (
(
)
)
on the screen and press the direct incline keys (4-8-12) on the controller or quick key(
on the screen to choose the
Target value.
However, in order to keep your safety, it's suggested don't operate any other functions when running. If the
user would like to use the application module in the console, please operate it under the speed less than 3KM/H
or on the state of stop.
Single click MEDIA will lead you to other application module interface:
If you want to pause the treadmill, you can press "||" on the screen or STOP/PAUSE on the controller, the interface
will be shown as below: