Sleep Function; Snooze Function - Hyundai RAC 521 PLLBCH Instruction Manual

SLEEP FUNCTION

If you want to listening the radio while fall asleep. You can use sleep function by setting the sleep
time. With the radio on, press THE SLEEP button (4) to enter into sleep mode.The 90 No. shows on
the LED display. It states 90-minutes of sleep time and to be set in sequence 90-80-70-60-50-40-30-
20-10-OFF.
Press the SLEEP (4) to choose your desired sleep time, the sleep timer will change by 10 minutes
each time you press the SLEEP button (4). The unit will stop playing when the timer countdowns from
the preset sleep time to the end and then switch off by itself.

SNOOZE FUNCTION

On alarm sound mode, press POWER/FUN (1) to stop Alarm 1 or Alarm 2, the alarm will not resume.
If you press the SNOOZE button (4) to stop the alarm, the al icon of the led display will blink, and the
alarm will resume after 9 minutes.
CHARGING YOUR SMART PHONE OR PORTABLE DEVICE
The unit features a USB port for charging your portable device. When used with USB charging cord
that came with device.
Plug one end of the USB cord (not included) into the USB port located on the back of the unit. Plug
the other end of cord into the device you wish to charge. Observe the battery charge indicator on
your device and the charging will start immediately. Unplug the cable when your device is charged.
CAUTION:
Before charging, please refer to the user manual of the device you wish to charge to make sure the
charging current required does not exceed 1,5 A (1500 mA) of charging current. Overloading the
charge circuit may damage the radio unit.
NOTE:
• Some smart phones and portable devices use proprietary USB connections and circuitry, so they
may not charge when plugged into the USB port. Please refer to your device user manual before
you attempt to charge them.
• It is normal for the radio unit to be warm while the USB port is in use and charging your smart
phone or portable device.
EN - 15