Advertisement
15
6 x Cam Nuts
Phillips Head
(H2)
Screwdriver
Insert 6 x Cam Nuts(H2) into Panel(P3&P4&P5) as shown.
Rotate the cam nuts so the arrows point towards the incoming cam bolts.
With assistance, attach Bottom(P2) to Panel(P3&P4&P5) by tightening
the Cam Nuts(H2) with the Phillips Head Screwdriver
16
6 x Hinges
12 x Short Screws
(H4)
(H5)
Using 4 x Short Screws(H5) to connect 2 x Hingers(H4) to Right Door(P13)
Adjust the door then tighten all screws with a Phillips Head Screwdriver.
Repeat previous step for Anther Right Door(P13) and Left Door(P12)
(P2)
TWO PEOPLE
REQUIRED
Page 12
Advertisement
