Mechanical Settings; To Set The Handlebar And Steering Column On Infinity - decon Infinity User Manual

Mechanical settings

To set the handlebar and steering column on Infinity

The handlebars and steering column on the Infinity are adjustable. By adjusting the steering
column, the height and angle of the handlebar can be changed.
Height adjustment
1. Loosen the screw that secures the steering
column with a 6 mm Allen key.
2. Move the steering column to the desired
height.
3. Tighten the screw to hold the steering
column in place.
WARNING!
It is extremely important that all screws are tightened correctly after installation.
Angle adjustment
1. Loosen the upper screw that locks the
angle adjustment with a 5 mm Allen key.
If necessary, hold with a 5 mm Allen key
on the opposite side.
2. Then loosen the lower screw that locks
the angle adjustment with a 5 mm Allen
key.
3. Adjust the angle of the steering column.
4. Tighten all screws to hold the handlebars
in place.
WARNING!
It is extremely important that all screws are tightened correctly after installation.
Adjusting the handlebars
1. Loosen the three screws that lock the handlebars in
the steering column with a 5 mm Allen key.
2. Turn the handlebar to the desired position.
3. Tighten all screws to hold the handlebars in place.
WARNING!
It is extremely important that all screws are tightened correctly after installation.
Mechanical settings
1
2
Page 25/41
Infinity
User manual