decon Infinity User Manual page 34

Infinity
User manual
Charging the battery removed from the Infinity
1. Fold up the handle and lift the battery out of
the holder.
2. Connect the adapter to the battery
connector.
3. Connect the charger to a wall socket.
4. Check that the lamp on the charger is green.
5. Connect the magnetic plug to the charging
socket on the charging adapter. Make sure
that the lug on the cable connector fits into
the slot on the socket.
INFO
Check that the lamp on the charger is red. This indicates that charging is in progress.
6. When charging is complete, disconnect the charger from the charging adapter and from the
wall socket.
7. Disconnect the charging adapter from the battery connector and put the battery back in
the holder on the Infinity. Lower the handle so that the battery locks securely.
Battery storage
Store the batteries in a cool and dry place (a place with a temperature between 10-25°C is
optimal for storage). If you plan not to use Infinity for a long time (one month or longer),
charge the battery until three of the charge level bars appear on the display before storing it. If
the battery is not used for a long time, it will automatically enter storage mode if the voltage
level in the battery is not too high. If the battery has entered storage mode, it must be
reactivated by putting it on charge. Check every 3 months that the voltage in the battery has
not dropped to too low a level. If one or no battery bars are displayed, charge the battery until
3-4 bars are displayed on the charge level.
Using Infinity
Page 34/41