To Disconnect Infinity - decon Infinity User Manual

4. Push the handlebars on the Infinity at an
angle upwards while leaning slightly
backwards to lift the wheelchair's castors
from the ground and lock the Infinity
against the lower dock (G). When Infinity
is connected to the lower docking point, a
clicking sound is heard.
5. First push the locking handle (D) forward
to release it. Then slide it back to lock the
Infinity to the adapter bar. The support
legs (J) are now raised.
Now Infinity is ready to go.

To disconnect Infinity

1. Switch off Infinity using the main switch
(R).
2. Lower the locking lever (D) until you
hear a click. NOTE! If the locking handle
is moved too far, it will not lock in its
lowered position. The support legs are
now folded down but do not reach the
ground.
3. Fold up the release handle (E) to its open
position to prepare the release.
4. Now push the handlebar forward while
leaning back to unlock the lower docking
point (G). When the lower docking point
is unlocked, a click is heard. Now drop the
wheelchair's castors to the ground.
5. To completely release the Infinity from
the chair, pull the Infinity at an angle
towards you and then push the Infinity at
an angle downwards away from you.
Using Infinity
Page 27/41
Infinity
User manual
Klick
Klick