Battery And Charger - decon Infinity User Manual

Battery and charger

Ambient temperatures for the battery
When used on Infinity
For storage, removed from Infinity
When charging
Charging the battery for Infinity can be done either with the battery in or out of the battery
holder on Infinity.
When charging with the battery in the battery holder, connect the charger's magnetic contact
to the socket on the side of the junction box below the display.
With the battery removed, use the custom adapter with the charger.
WARNING!
Be careful not to get your finger trapped when inserting or removing the battery.
The Infinity charger is equipped with a light to show the charging status. When the charger is
connected to the wall socket and the lamp shows a green light, the charger can be connected
to the charging socket.
When the charger is connected to the charging socket and the battery is charging, the charger
shows a red light.
When the battery is fully charged, the light is green. A fully discharged battery can take up to 5
hours to charge fully.
Charging the battery in Infinity
1. Connect the charger to a wall socket.
2. Check that the lamp on the charger is green.
3. Connect the magnetic plug to the charging
socket at the display. Make sure that the lug
on the cable connector fits into the slot on the
socket.
INFO
Check that the lamp on the charger is red.
This indicates that charging is in progress.
4. When charging is complete, disconnect the
charger from the Infinity and the wall socket.
Using Infinity
-15 ° C - 40 ° C
10 ° C - 25 ° C
5 ° C - 30 ° C
Page 33/41
Infinity
User manual