Running Infinity - decon Infinity User Manual

Running Infinity

WARNING!
The user must have read and understood the manual and have an understanding of the
various controls and user interfaces that Infinity is equipped with.
WARNING!
Do not make sharp turns at high speed. This may cause Infinity and the wheelchair to tip
over.
To run Infinity, you must first have Infinity connected to the wheelchair according to the
section "Connecting Infinity to your wheelchair"
1. Press the main switch located below the
display. The light in the main switch will
flash on start up. When the light is solid,
Infinity is ready to go.
2. Use the throttle control to move forwards.
When reversing, the reverse button located
next to the throttle control is used.
3. Turn the throttle control to drive and
regulate the speed.
Speed control is primarily controlled by means
of the throttle control.
WARNING!
When driving on a steep descent, it may be necessary to apply the brakes to limit the
speed. Engine braking is only effective to a certain extent.
Using Infinity
1
Page 29/41
Infinity
User manual
3
2