Comm Radio Operation; Power On/Off; Volume - Garmin Apollo GX 50 User Manual

Comm Radio Operation

Active
Frequency
Monitor
Power
On/Off

Volume

This section introduces the basic operating details of
the VHF Communications Transceiver portion of the
Apollo GX60/65. The Comm information is
displayed in the bottom row of the display: Active (A)
and Standby (S) frequencies. The Active (A) indicator
changes to "Tx" when you are transmitting. The
Standby (S) indicator changes to an "m" when the
monitor function is used. The Smart keys will change
when you press the
(MON), Recall (RCL), Memory (MEM), and
Flip/Flop (<->) functions. The Standby (S)
frequency is reversed when Comm Radio operation is
selected.
ete SLE 01:23
1.006
Brg 126
a119.10 s118.75
MSG MON
Recall
Turn the Power/Volume control clockwise past the
OFF detent.
Turn the Power/Volume control clockwise to
increase the volume level and counterclockwise to
decrease volume.
SMALL and LARGE Knobs
The dual concentric knobs on the right side of the
GX60/65 are used to select frequencies or other
options. The
LARGE
MHz value in 1 MHz steps.
The inner knob changes the kHz values in 25
SMALL
kHz steps.
The and
LARGE
different functions and for editing. Other functions
will be described in the affected section.
Comm Radio Operation
key to add the Monitor
COM
"ª
± 123nm
RCL MEM < >
Memory
outer knob is used to change the
knobs are used to view
SMALL
Standby
Frequency
Flip/Flop
10-1