SMALL
each character of the waypoint name.
Waypoint Type
(Airport shown here)
City or Facility
Name
4. When you have entered the waypoint name,
ENTER
press
Change Lat/Lon Reference Position
1. Set the latitude and longitude coordinates near to
your current position. After setting the Reference
Waypoint, the first character of the Reference
Position Lat/Lon will flash.
2. Change the character with the
the
Lat/Lon position and change it with the
3. Enter the Lat/Lon position, then press
ENTER
knob. Turn the
Underline indicates
flashing character
AIRPORT
SALEM
CITY
City or Facility
.
ENTER
Ppos: 44°54.46N
122°59.69W
Ref Wpt: Chg?
knob to move to each character of the
LARGE
Ppos: 44°54.46N
122°59.69W
Start Up Displays
knob to move to
LARGE
Waypoint
Indentifier
SLE
OR USA
Country
State
knob. Turn
SMALL
SMALL
knob.
.
ENTER
11-7