Moving Map Functions
SEL
ENTER
ENTER
ENTER
4-24
3. Press
. The Starting Waypoint field will flash
SEL
"INS?" (insert) or "CHG?" (change). Press
to start editing the Starting Waypoint selection.
Start: Ins?
Spacing
Direction :000·
4. Choose a waypoint using normal selection
methods. Then, press
5. The Spacing option will flash. Turn the
knob to select the desired pattern spacing. You may
select between 0.2 and 9.9 nm.
Start:PFC
Spacing
Direction :000·
6. Turn the
LARGE
option. Turn the
Direction of Travel. You may select a direction
from 0 to 359.
Start:PFC
Spacing
Direction :000·
7. Press
when selections are complete.
ENTER
8. Note the diamond on the lower, right portion of the
screen. This indicates another available page. Turn
the
knob one position to view the next setup
SMALL
page.
:1.0
.
ENTER
arpt
:1.0
knob to the Direction of Travel
knob to select the desired
SMALL
arpt
:1.5
ENTER
SMALL