Garmin Apollo GX 50 User Manual page 91

The Outer selection refers to the outline of the outside
ring extended from the ground on up. Selecting Outer
will be useful to VFR pilots who wish to avoid all
airspaces. The sector selection refers to the outside
edges of the sector from the ground on up unless you
have
3-dimensional information. The Sector selection is
the default setting and is most useful for IFR flight.
An airspace will appear in the Nearest list even if the
map or alert selections are set to off. The Map (MAP)
and Alert (ALE) "smart" keys also select the options.
1. While viewing the Map Setup page, turn the
knob to the Airspace Setup page. Turn the
knob to view the desired Airspace selection page.
Class B Airspace
Map
Alert : Off
2. Press
SEL
knob to change the selection.
Class B Airspace
Map
Alert : Off
3. Turn the
Turn the
Class B Airspace
Map
Alert : Outer
4. Press
ENTER
SMALL
altitude input
: Off
to activate selection. Turn the
SEL
: Sector
knob to move to the next selection.
LARGE
knob to select your choice.
SMALL
: Sector
after making the selection. Turn the
ENTER
knob to view the other Airspace pages.
Moving Map Functions
which then allows for
SMALL
SMALL
SMALL
4-13