Garmin Apollo GX 50 User Manual page 252

Approach Examples
FPL
FPL
ENTER
ENTER
9-62
Manually select the leg from BTG to OLM (which is
V287). Even though you have not yet reached BTG,
you will know when you have intercepted this course.
1. Press twice to reach the active plan in Flight
FPL
Plan Mode. This example uses a flight plan from
the Salem (SLE) airport to the Battle Ground
(BTG) VOR and then to the Olympia (OLM)
VOR. Turn the
view the first leg of your flight plan.
Note that on the second line of each leg page, a
number appears to indicate the leg number. An
Asterisk is used after the number of each leg to
indicate the active flight plan.
SLE to BTG
1** 001° 53.2nm
arpt
Two asterisks after the leg number indicate the active
leg of the active flight plan (SLE to BTG).
BTG to OLM
2* 331° 74.4nm
vor
2. Turn the
SMALL
activate is shown and then press
3. Now fly the ATC assigned heading of 360 until the
CDI centers to indicate that we have intercepted
V287.
knob clockwise one click to
SMALL
vor
vor
knob until the leg you wish to
twice.
ENTER