Communications Radio Mode Smart Keys (Gx60/65) - Garmin Apollo GX 50 User Manual

Introduction
Communicat
ions Radio
Mode Smart
Keys
(GX60/65)
COM
< >
RCL
MON
MEM
XIT
1-8
The Recall (RCL), Monitor (MON), Memorize
(MEM), and
FLIP/FLOP
the GX60/65 after the
COM (GX60/65)
Press the
COM
radio functions.
Flip/Flop (GX60/65)
Press the
FLIP/FLOP
(left-most) and standby (right-most) frequency while in
the Com function. You may use an optional external
key for the same operation as the front panel
FLIP/FLOP
control. Switching between frequencies is disabled while
you are transmitting or editing in any function.
RCL (Recall) (GX60/65)
Press the key to recall frequencies stored in the
RCL
database.
MON (Monitor) (GX60/65)
Press the key to listen to the Standby frequency.
MON
When the Active frequency receives a signal, the
GX60 will automatically switch to the Active
frequency.
MEM (Memorize) (GX60/65)
Press the
MEM
frequency.
XIT (Exit) (GX60/65)
The key will appear on the far left of the display,
XIT
in the key position, if the
MSG
pressed to allow use of the radio during startup
testing. Press the
sequence, or wait for test completion. The
will disappear when testing is complete.
(<->) keys are available in
soft key has been pressed.
COM
key to operate the Communications
key to switch between the active
key to store the current Standby
key to return to the start-up
XIT
key has been
COM
XIT
key