Page 1
WF29014 ASSEMBLY INSTRUCTIONS 38” BLACK ASSEMBLY METAL INSTRUCTIONS GARDEN GATE WF29014 WITH 4 FENCE PANELS 30 MIN Approximate assembly time Want to see a video on how to assemble this product? Scan the QR code WWW.ZIPPITY-OUTDOOR.COM VER. 081821 WWW.ZIPPITY-OUTDOOR.COM...
Page 2
WF29014 ASSEMBLY INSTRUCTIONS GENERAL IMPORTANT INFORMATION Check the inside of the larger pieces in your box for other materials packed inside. When assembling components, place on a non-abrasive surface (i.e. shipping box) to avoid scratching. We recommend an area approximately 5’x 8’ for unobstructed assembling.
Page 3
WF29014 ASSEMBLY INSTRUCTIONS 36.2 in 35.7 in 2.9 in 2.8 in 39.2 in .7 in 8.4 in WWW.ZIPPITY-OUTDOOR.COM...
Page 4
WF29014 ASSEMBLY INSTRUCTIONS LAY OUT MATERIALS STEP 1: Gate Panel (1) 38"H x 353/4"W Metal Stake (6) Fence Panel (4) ½" Diameter x 50" L 39"H x 36"W WWW.ZIPPITY-OUTDOOR.COM...
Page 5
WF29014 ASSEMBLY INSTRUCTIONS INSTALL FENCE PANEL STEP 2: STEP 2.1 BETTER GOOD Insert the Metal Stake through the 4 loops on the Fence Panel (B), and use a rubber mallet to drive the metal stake into the ground until it meets the top loop.
Page 6
WF29014 ASSEMBLY INSTRUCTIONS INSTALL GATE STEP 3: STEP 3.1 Once you get to the spot where you are installing the gate, insert a metal stake through loops of the fence panel and the Gate Panel (A). The gate should sit roughly 1” off the ground.
Need help?
Do you have a question about the WF29014 and is the answer not in the manual?
Questions and answers