Polycom VVX Quick Start Manual page 2

Polycom VVX Camera
USING YOUR CAMERA
When you are on a call with a person that
has a video-enabled phone, your video
(the near side) displays in the PIP, and the
person you are talking with (the far side)
displays in the call window.
These buttons give you
access to camera controls.
These buttons will both
start and stop the
transmission of your video.
This button expands the
view of the far side video.
This button switches the
far side and near images.
This button will return the
video to the default position.
screen.
This image indicates that you
have stopped the far side from
seeing your video image.
This image indicates the far
side cannot see video.
This image indicates the
far side has stopped
sending video.
25925 Telegraph Rd., Ste. 210, Southfield, MI 48033 – 1-877-298-4791 – www.bullseyetelecom.com
Tapping the Video soft key displays
other soft keys that allow you to:

Prevent the far side from seeing you

View video on the full screen

Swap the windows video displays
You can choose to
display all video
calls as either
normal, full, or
cropped images.
To change how
1. Tap Settings from Home view, and tap Basic > Video > Video Screen Mode.
video calls are
2. From the Video Screen Mode screen, tap, and then select from Normal, Full,
displayed
or Crop. The default setting is Normal.
3. Tap Save.
UNDERSTANDING YOUR CAMERA
LED State
One of the following:

No LED

Flashes red and green, and

then turns off

Flashes amber and green

Flashes green

Green
One of the following:



Amber



Phone State
Phone has no power
Camera shutter is closed
Camera is booting up
Camera firmware is updating
Incoming video call
Video call is connected
Incoming call (no video or
audio-only
Outgoing call
Audio call is connected
Video is muted
Held call
Camera shutter is open, but
video is not enabled and
camera is not selected.