Polycom VVX Quick Start Manual

Polycom VVX Camera
TECHNICAL THINGS TO KNOW
Easy addition to either the Polycom VVX
500 or VVX 600 desktop phones
No software, drivers, or power is
required – its plug and play!
Supports up to 720p HD resolution
Works w/ SIP & H.323 standard
addresses.
An average video call utilizes about
600kb of bandwidth.
The VVX Camera can communicate with
any other VVX 500/600 phone that has a
camera installed.
The video image is uncompressed and
offers an "anti-flicker" feature.
The camera is always turned on unless
you close the privacy shutter.
TIPS & POINTERS
Place the phone 2-3 feet away from you.
Move the base of the phone to the
lowest of the 3 positions so that the
phone is as upright as possible.
Make sure that the area behind you is
not too bright.
25925 Telegraph Rd., Ste. 210, Southfield, MI 48033 – 1-877-298-4791 – www.bullseyetelecom.com
INSTALLING THE CAMERA
Step
Step 1: On the top of the
and gently insert it into
phone, remove the plastic
the USB port, with the
cover by sliding it up and
lens facing out.
off the camera.
CONTROLLING THE CAMERA
To adjust the camera angle, carefully slide the adjustment
bar on the top of the camera. The display screen on your
phone will show you the view that others can see. Feel
free to do this anytime...even during a call.
2: Take the camera
Step 3: Snap the camera
in place to ensure it is
firmly attached.
The camera is
mounted and
ready to go!
With the slider in the down
position, the privacy Shutter is
open. Other users can view you!
Rotate the slider to the up position to
close the privacy Shutter. Other users
cannot see you!