Auto Lap - Garmin Forerunner 410 Owner's Manual

• When Stopped—pauses
timer automatically when you
stop moving.
3. Press quit to exit.
Auto Pause is helpful if your training
includes stop lights or other places
where you need to slow down or
stop.

Auto Lap

You can use Auto Lap to
automatically mark the lap at a
specific position or after you have
traveled a specific distance. This
setting is helpful for comparing your
performance over different parts of a
run (every 2 miles or major hill, for
example).
Setting Auto Lap
1. Touch and hold
Training > options
Forerunner 410 Owner's Manual
menu
> select
> Auto Lap.
2. Select By Distance
By Position
value or
an option:
• Lap Press
each time you press
each time you pass any of
those locations again.
• Start and
at the GPS location where
you press
locations during the run where
you pressed lap.
• Mark and
at the specific GPS location
you mark when you select
this option and at any location
during the run where you
pressed lap.
quit
3. Press to exit.
noTe: When doing a course, use
By Position
to mark laps at all of the
lap positions marked in the course
(page 17).
Training Mode
to enter a
to choose
Only—marks a lap
lap and
Lap—marks a lap
start and at any
Lap—marks a lap
11