Table of Contents
Advertisement
Switching the power on
Display
6.
"Time"
7.
"Date"
8.
"T DHW set"
9.
"DHW circ."
10.
"Save"
Special features of the cascade control units
Some menu points are only available to the master
control unit. They are not shown on the screens of the
slave control units.
(cont.)
Explanation
At the master control unit:
Set the time.
At the master control unit:
Set the date.
At the master control unit:
Select the set DHW temperature.
At the master control unit:
Enable DHW circulation and set DHW circulation mode.
■
Carry out manual balancing of the DHW circulation flow
■
rate.
Terminate the commissioning menu in all control units with
"Save". The settings are saved. The default display is
shown on the screen.
■
The "DHW" menu settings have to be made in the
master control unit. They apply to all subscribers of
the cascade.
The DHW circulation menu settings have to be made
■
in the master control unit. They only apply to the
master control unit.
Commissioning
See page
17
17
18
20
22
15
Advertisement
Table of Contents
