Technical Menu - Sony VENICE 2 Operating Instructions Manual

87
3. Camera Operations

Technical Menu

The functions and available settings of each menu item are given below.
Default values are shown underlined and in
Technical > System Configuration
Makes settings related to control of the unit.
Menu item Setting
Fan Control Auto / Max /
Off in Rec/Auto
Off in Rec/Max
Shutter Mode Speed/Angle
SDI Rec Remote Off / HD SDI Remote I/F /
Trigger Parallel Rec
Level Gauge Adjust Run/Cancel
Level Gauge Reset Run/Cancel
Technical > Lens Configuration
Makes settings related to lenses.
Menu item Setting
PL-Mt Interface Top/Side/Off
Position
8 V  24
PL-Mt Voltage V/24 V
Focus Distance Meter/Feet
Format
Lens 12pin On/Off
bold text.
Description
Selects the fan control mode.
/ Auto: Controls the fan automatically in
response to the internal temperature.
Max: Fan rotates at maximum speed.
Off in Rec/Auto: The fan is silent when
recording, and operates automatically in
response to the internal temperature
when not recording.
Off in Rec/Max: The fan is silent when
recording, and rotates at maximum speed
when not recording.
Selects the operating mode of the electronic
shutter.
Selects the SDI remote mode control method.
Off: Disables remote control.
HD SDI Remote I/F: Uses HD SDI Remote
control method.
Parallel Rec: Uses valid flag control method.
Execute the zero adjustment of the spirit level
gauge (execute by selecting Run).
Reset the zero adjustment value of the spirit
level gauge (execute by selecting Run).
Description
Sets the interface position of the PL-mount
lens.
[Note]
Set before attaching a lens, according to the lens
to attach. If changing this setting while the lens is
attached to the unit, reboot the unit.
Sets the powering method of the PL-mount lens.
Selects the focus position display units.
Turns the 12-pin lens interface on/off.
[Note]
If changing this setting while the lens is attached to
the unit, reboot the unit.
Technical > Lens Configuration
Makes settings related to lenses.
Menu item Setting
E-Mount Shading Auto/Off
Comp.
E-Mt Chro. Aber. Auto/Off
Comp.
Technical > Auto Pixel Restore
Executes Auto Pixel Restoration (auto adjustment of the image sensor).
Menu item Setting
Auto Pixel Run/Cancel
Restoration
Reset Run/Cancel
Technical > Authentication
Makes basic settings related to network authentication.
Menu item Setting
User Name (Displays the current user
name.)
Password (*******)
Technical > Network
Makes settings related to the network.
Menu item Setting
Setting LAN/Wireless/Off
Description
Sets whether to compensate for a drop in
peripheral lighting when a compatible lens is
attached.
Sets whether to compensate for chromatic
aberration in peripheral lighting when a
compatible lens is attached.
Description
Executes the automatic pixel noise reduction
function (execute by selecting Run).
Deletes white flecks added by execution of
the APR function (execute by selecting Run).
Description
Sets the user name to use for access
authentication.
Set to "admin" by factory default.
Sets the password to use for access
authentication (8 or more alphanumeric
characters containing at least one alphabetic
and one numeric character).
When entering a password, the asterisk
characters displayed are replaced by the
entered characters while the sub display ITEM
key 1 is pressed.
Description
Sets the network connection method.
[Note]
Grayed out and cannot be changed if a password is
not configured using Technical > Authentication >
Password (page 87) in the full menu.