Sony VENICE 2 Operating Instructions Manual page 40

40
3. Camera Operations: Operations on the Home Screen of the Sub Display
LUT selection screen display items
The items displayed will vary depending on the Output Format setting.
ITEM key 1
1
4
ITEM key 4
Output Format
SDI1/2 SDI3/4 Monitor HDMI
4K/QFHD FHD FHD 4K/
12G/6G QFHD
FHD
4K/QFHD Square FHD
Quad
4K/QFHD 2SI Quad 4K/
QFHD
FHD
ITEM key 2 ITEM key 3
2 3
5 6
ITEM key 5 ITEM key 6
Display indication
VF ITEM key 1 ITEM key 2 ITEM key 3
FHD SDI 1/2, SDI 3/4, Viewfinder
HDMI Monitor
SDI 1/2 SDI 3/4, Viewfinder
Moni, HDMI
SDI 1/2/3/4 Blank Viewfinder
SDI 1-4, Blank Viewfinder
HDMI
SDI 1/2/3/4 Blank Viewfinder
Output Format
SDI1/2 SDI3/4
4K/QFHD FHD
Square
Dual
4K/QFHD FHD
2SI Dual
2K/FHD FHD
FHD FHD
1) Blank when Project > Basic Setting > Recording Format is set to X-OCN format in the full menu
Changing Preset Look
You can set a LUT when Look is selected on
the LUT selection screen using the Edit Look
button (ITEM key 4) on the LUT selection
screen.
1
Press the Edit Look button (ITEM key 4) on
the LUT selection screen.
The Look selection screen appears.
ITEM key 5 ITEM key 6
Blank ProRes
1)
Blank ProRes
1)
Monitor, ProRes
1)
HDMI
2
Monitor ProRes
1)
Select Category > Preset Look, use the
button (ITEM key 5) or MENU dial to move
Monitor, ProRes
1)
the cursor to Preset Look, and press the
HDMI
Select button (ITEM key 3).
The items that can be selected are
displayed.
Display indication
Monitor HDMI VF ITEM key 1 ITEM key 2
FHD FHD FHD SDI 1/2 SDI 3/4,
Moni, HDMI
4K/ SDI 1/2, SDI 3/4,
QFHD HDMI Monitor
FHD SDI 1/2 SDI 3/4,
Moni, HDMI
FHD SDI 1/2 SDI 3/4
– SD SDI 1/2 SDI 3/4
3
Use the
(ITEM key 5), or MENU dial to change the
setting.
4
Press the MENU dial or Set button (ITEM
key 3) to apply the setting.
Changing the LUT category
You can change the target category for LUT
operations to User 3D LUT, ART, ACES, or Preset
Look (page 66).
1
Press the Edit Look button (ITEM key 4) on
the LUT selection screen.
The Look selection screen appears.
2
Move the cursor to Category, and press
the MENU dial or the Select button (ITEM
key 3).
3
Use the
(ITEM key 5), or MENU dial to select a
category (User 3D LUT, ART, ACES, or
Preset Look).
ITEM key 3 ITEM key 5 ITEM key 6
Viewfinder Blank ProRes 1)
Viewfinder Blank ProRes
1)
Viewfinder Blank ProRes
1)
Viewfinder Monitor, ProRes
1)
HDMI
Viewfinder Monitor HDMI
button (ITEM key 2), button
button (ITEM key 2), button