Sony VENICE 2 Operating Instructions Manual page 49

49
3. Camera Operations: User Functions Screen
Assignable Button Function
setting
SDI 1/2 Frame Line Turns superimposition of frame lines on the
SDI 1/2 output image on/off.
SDI 3/4 Frame Line Turns superimposition of frame lines on the
SDI 3/4 output image on/off.
SDI Overlay Turns display of information on the SDI output
image on/off.
Press&Hold for SDI12 Disables the LUT applied to the SDI 1/2 output
Log image while the button is pressed, and sets
Log image quality without applying a LUT.
Press&Hold for SDI34 Disables the LUT applied to the SDI 3/4 output
Log image while the button is pressed, and sets
Log image quality without applying a LUT.
When the SDI 3/4 output and Monitor output
are linked, Press & Hold for Moni Log is also
enabled.
Monitor Frame Line Turns superimposition of frame lines on the
Monitor output image on/off.
Monitor Overlay Turns display of information on the Monitor
output image on/off.
Press & Hold for Moni Disables the LUT applied to the Monitor
Log output image while the key is pressed for
4)
normal image quality without applying a LUT.
When the SDI 3/4 output and Monitor output
are linked, Press&Hold for SDI34 Log is also
enabled.
When the HDMI output and Monitor output
are linked, HDMI output is also enabled.
Monitor Focus Turns the focus magnifier function of the
Magnifier Monitor output image on/off.
2) 3)
Monitor Highlight Turns the function that displays clipped
Clip Ind highlight areas in red on the Monitor output
1)
image on/off.
Monitor False Color Turns the false color function display on a
1)
monitor on/off.
Line A: Aspect Ratio Turns the Aspect Ratio display for Line A on/
Disp. off.
Line B: Aspect Ratio Turns the Aspect Ratio display for Line B on/
Disp. off.
State after rebooting Assignable Button
setting
Setting retained Line A: User Frame
Disp.
Setting retained
Setting retained
Setting not retained
Line B: User Frame
Disp.
Setting not retained
H & V Flip
Anamorphic De-
Setting retained
Squeeze
Setting retained
Setting not retained
Auto White Balance
Color Bars
Picture Cache Rec
AXS Slot Change
Setting not retained
Format Media AXS
Slot A
Setting retained
Format Media AXS
Slot B
Setting retained Iris Open (1/16 stop)
Setting retained
Setting retained
Function
Turns the User Frame Line 1 and User Frame
Line 2 display for Line A on/off.
Each time the key is pressed, the display
switches between User Frame Line 1 and 2
display  User Frame Line 1 display  User
Frame Line 2 display  User Frame Line 1 and
2 hidden.
Turns the User Frame Line 1 and User Frame
Line 2 display for Line B on/off.
Each time the key is pressed, the display
switches between User Frame Line 1 and 2
display  User Frame Line 1 display  User
Frame Line 2 display  User Frame Line 1 and
2 hidden.
7) Flips the shooting mode image orientation.
Changes the Project > Basic Setting > Anamo.
De-Squeeze setting in the full menu.
Each time the key is pressed, the setting
changes to the next item in the list of menu
selection options.
Executes auto white balance.
5)
5) Turns color bars on/off.
Turns the picture cache recording function
on/off.
Switches the active slot when two AXS
memory cards are inserted.
Switches between A and B each time the key
is pressed.
Formats media in AXS slot A.
Formats media in AXS slot B.
Opens the lens iris.
6)
Press and hold to open the iris until fully
open.
This function is available when an E-mount
lens with power iris is attached.
The setting is in 1/16 stop increments,
whereas the iris indication is in units of 1/3
stop increments.
State after rebooting
Setting retained
Setting retained
Setting retained
Setting retained
–
Setting retained
Setting retained
Setting retained
–
–
–