Sony VENICE 2 Operating Instructions Manual page 69

69
3. Camera Operations: Shooting Menu
Shooting > LUT Select
Makes settings related to the LUT to apply to the output image.
[Note]
The value of each menu item (excluding SDR Gain) varies depending on the Technical > Special Configuration > RM/
RCP Paint Control (page 91) setting in the full menu.
Menu item Setting
SDI 3/4 When RM/RCP Paint Control is
set to Off:
Log/Look
When RM/RCP Paint Control is
set to On:
Log/HLG(Natural)/
HLG(Live)/User Gamma
Description
Selects the LUT to apply to the SDI 3/4 output
image.
[Note]
When SDI 1/2 output is the following, this is set to
the same value as SDI 1/2 (fixed).
– 4K/QFHD Quad output
– 4K/QFHD Dual output
When SDI 1/2 output is the following, this is set to
the same value as Monitor (fixed).
– 4K/QFHD 12G/6G output
– 4K/QFHD Dual output
The SDI 3/4 output image setting is display
only, because it is determined by the Project >
Basic Setting > Input Color Space (page 72)
setting in the full menu.
[Note]
When SDI 1/2 output is the following, this is set to
the same value as Monitor (fixed).
– 4K/QFHD 12G/6G output
– 4K/QFHD Dual output
When SDI 1/2 output is the following, this is set to
the same value as SDI 1/2 (fixed).
– 4K/QFHD Quad output
– 4K/QFHD Dual output
Shooting > LUT Select
Makes settings related to the LUT to apply to the output image.
[Note]
The value of each menu item (excluding SDR Gain) varies depending on the Technical > Special Configuration > RM/
RCP Paint Control (page 91) setting in the full menu.
Menu item Setting
Monitor When RM/RCP Paint Control is
set to Off:
When Output Format > SDI
1/2 is set to 2K/HD:
Log/s709/R709(800%)/
Look/---
When Output Format > SDI
1/2 is set to 4K/QFHD:
Log/s709/R709(800%)/
Look/---
When RM/RCP Paint Control is
set to On, the settings change
as follows depending on the
Project > Basic Setting > Input
Color Space (page 72)
setting in the full menu.
S-Gamut3.Cine/SLog3 or
S-Gamut3/SLog3:
Log/R709(800%)
HLG(Natural):
HLG(Natural)/R709(800%)
HLG(Live):
HLG(Live)/R709(800%)
Rec.2020/User Gamma:
User Gamma/R709-Like
Rec.709/User Gamma:
User Gamma
Description
Selects the LUT to apply to the Monitor output
image.
[Note]
There is no output and "---" (disabled) is displayed
when Technical > Special Configuration > SD HDMI
(page 91) is set to On in the full menu.
Selects the type of Monitor output image.
[Notes]
• An SDR gain value (–12 dB) is applied to the
viewfinder/monitor output image.
• You can change the output gain using SDR Gain
when set to R709(800%) or R709-Like.