Sony VENICE 2 Operating Instructions Manual page 52

52
3. Camera Operations: User Functions Screen
Assignable Button Function
setting
Iris Open (1/16 stop) Opens the lens iris.
7)
Press and hold to open the iris until fully
open.
This function is available when an E-mount
lens with power iris is attached.
The setting is in 1/16 stop increments,
whereas the iris indication is in units of 1/3
stop increments.
Iris Close (1/16 stop) Closes the lens iris.
7)
Press and hold to close the iris until fully
closed.
This function is available when an E-mount
lens with power iris is attached.
The setting is in 1/16 stop increments,
whereas the iris indication is in units of 1/3
stop increments.
1) Does not function if the button is pressed when Technical > Special Configuration > RM/RCP Paint Control
(page 91) is set to On in the full menu.
2) Also applied to the HDMI output if the HDMI output has the same output format as the Monitor output. You can
check the setting using Monitoring > Overlays/Frame Line > HDMI (page 79) in the full menu. The HDMI output is
the same as the Monitor output if HDMI is set to "Same as Monitor".
3) If the SDI output format is 1920×1080i, the focus magnifier function is off, and pressing the button performs no
function.
4) Switches to the same image as the main signal that is selected using Project > Basic Setting > Input Color Space
(page 72) in the full menu while the button is pressed.
5) Does not function if the button is pressed when an RM-B170 or other remote control unit is connected and
Technical > Special Configuration > RM/RCP Paint Control (page 91) is set to On in the full menu.
6) When Technical > Special Configuration > RM/RCP Paint Control (page 91) is set to On and Shooting > LUT Select
> VF LUT (page 70) is set to R709(800%) or R709-Like in the full menu, this switches to the same image as the
main signal while the button is pressed. When RM/RCP Paint Control is set to Off and VF LUT is not set to Log, this
switches to the same image as the main signal while the button is pressed.
7) Does not function if the button is pressed when an RM-B170 or other remote control unit is connected.
8) Does not function if the button is pressed when Monitoring > Output Display > Flip Image (page 77) > H & V Flip
in the full menu is grayed out.
State after rebooting Functions that can be Assigned to Viewfinder (DVF-EL200) Assignable
Buttons A to C
–
Assignable Button
setting
No Assign
VF Frame Line
–
VF Overlay
Press & Hold for VF
Log
2)
VF Focus Magnifier
VF Highlight Clip Ind
VF High/Low Key
VF False Color
VF Zebra
Line A: Aspect Ratio
Disp.
Line B: Aspect Ratio
Disp.
Line A: User Frame
Disp.
Function
No assignment
Turns superimposition of frame lines on the
viewfinder/monitor screen output image on/
off.
Turns the information display on the
viewfinder/monitor screen output image on/
off.
Disables the LUT applied to the viewfinder/
monitor screen output image while the
button is pressed for normal image quality
without applying a LUT.
Turns the focus magnifier function of the
viewfinder on/off.
Turns the function to display clipped highlight
3)
areas in red in the viewfinder on/off.
Selects the viewfinder output mode.
3)
Switches between High Key (screen for
checking for blown-out highlights)  Low
Key (screen for checking for blocked-out
shadows)  Off (normal display) each time
the button is pressed.
3) Turns the false color function display in a
viewfinder on/off.
Turns the zebra function of the viewfinder/
monitor screen output image on/off.
Turns the Aspect Ratio display for Line A on/
off.
Turns the Aspect Ratio display for Line B on/
off.
Turns the User Frame Line 1 and User Frame
Line 2 display for Line A on/off.
Each time the button is pressed, the display
switches between User Frame Line 1 and 2
display  User Frame Line 1 display  User
Frame Line 2 display  User Frame Line 1 and
2 hidden.
State after rebooting
–
Setting retained
Setting retained
Setting not retained
Setting not retained
Setting retained
Setting not retained
Setting retained
Setting retained
Setting retained
Setting retained
Setting retained