Sony VENICE 2 Operating Instructions Manual page 68

68
3. Camera Operations: Shooting Menu
Shooting > Look
Makes settings related to Preset Look.
[Note]
Look is grayed out and the setting cannot be changed when Technical > Special Configuration > RM/RCP Paint
Control (page 91) is set to On in the full menu.
Menu item Setting
ASC CDL Process
Shooting > Look
Category
Preset Look s709
User 3D
LUT
ART
ACEScct
with User
3D
ACESproxy
with User
3D
ACES with
ART
ASC CDL Select No File/Not Selected
ASC CDL Information
Description
Project > Basic Setting >
Input Color Space
Preset Look Select
S-Gamut3/Slog3
S-Gamut3.Cine/Slog3
R709(800%) S-Gamut3/Slog3
S-Gamut3/Slog3 S-Gamut3.Cine/Slog3
S-Gamut3.Cine/ S-Gamut3/Slog3
Slog3
S-Gamut3.Cine/Slog3
ACESproxy ACEScct
ACEScct
ACES 1.0
Output-Rec.709
– S-Gamut3/Slog3
S-Gamut3.Cine/Slog3
– S-Gamut3/Slog3
S-Gamut3.Cine/Slog3
– ACEScct
– ACEScct
Selects the ASC CDL registered in the unit.
Displays information from the ASC CDL file
selected by ASC CDL Select.
You can change the Saturation setting on the
displayed screen.
Shooting > Look File
Loads a User 3D LUT file into the unit.
[Note]
Look File is grayed out and the setting cannot be changed when Technical > Special Configuration > RM/RCP Paint
Control (page 91) is set to On in the full menu.
Menu item
Load User 3D LUT
ASC CDL Process
available options
Reset User 3D LUT
CDL Off
Reset All User 3D
Look -> CDL
LUTs
CDL -> Look
Load ART
CDL Off
Look -> CDL
Reset ART
CDL Off
Reset All ARTs
Look -> CDL
CDL Off
Load ASC CDL
Look -> CDL
Reset ASC CDL
CDL Off
CDL On
Reset All ASC CDLs
Shooting > LUT Select
CDL Off
Makes settings related to the LUT to apply to the output image.
Look -> CDL
CDL -> Look [Note]
The value of each menu item (excluding SDR Gain) varies depending on the Technical > Special Configuration > RM/
CDL Off
RCP Paint Control (page 91) setting in the full menu.
Look -> CDL
Menu item
CDL -> Look
SDI 1/2
CDL Off
CDL -> Look
CDL Off
CDL -> Look
Setting Description
Loads a User 3D LUT file stored on an SD card
into the unit.
Resets a User 3D LUT data setting.
Run/Cancel Resets all User 3D LUT data settings (execute
by selecting Run).
Loads an ART file stored on an SD card into
the unit.
Resets an ART data setting.
Run/Cancel Resets all ART data settings (execute by
selecting Run).
Loads ASC CDL data from an SD card.
Resets an ASC CDL data setting.
Run/Cancel Resets all ASC CDL data settings (execute by
selecting Run).
Setting Description
When RM/RCP Paint Control is Selects the LUT to apply to the SDI 1/2 output
set to Off: image.
Log/Look
When RM/RCP Paint Control is The SDI 1/2 output image setting is display
set to On: only, because it is determined by the Project >
Log/HLG(Natural)/ Basic Setting > Input Color Space (page 72)
HLG(Live)/User Gamma setting in the full menu.