Specifications: Front Panel Jumpers And Test Ports - Keysight N5244/45AS Option H85 User's And Service Manual

N5244/45AS Option H85

Specifications: Front Panel Jumpers and Test Ports

Specifications: Front Panel Jumpers and Test Ports
Specifications for Option H85 are the same as the standard PNA-X with Option 219 or 419. The
following specifications are available from the PNA-X Data Sheet at our web site:
http://www.keysight.com/find/pna
• Measurement Receiver Inputs
• R1 Reference Receiver Inputs
• R2 - R4 Reference Receiver Inputs
• R1 Source Outputs
• R2 - R4 Source Outputs
• Source Outputs
1
• Coupler Inputs
• Coupler Outputs
• Test Port Inputs
It is recommend that you do not operate components near damage or maximum
CAUTION
levels. The power levels should be kept at less than 3 dB, preferably 6 dB, below
damage and maximum levels.
All PNA-X options have the following front panel jumpers for each port.
Figure 20 Front Panel Jumpers
Port 1 through Port 4 Insertion Loss of Coupler Thru specifications are the same as the standard Option
1.
200 or 400. Refer to the Keysight 2-Port and 4-Port PNA-X Network Analyzer Data Sheet and Technical
Specifications (N5245-90008). The maximum DC Level is 40 VDC.
20 N5245-90002 User's and Service Guide