Advertisement
DIMENSIONS Luminar Inbuilt
(A)
(B)
Luminar MODEL
LC-1000i
845 (Fascia)
LC-2000i
945 (Fascia)
LC-3000i
1045 (Fascia)
LC-4000i
1410 (Fascia)
DIMENSIONS Luminar Stand Alone
(A)
External dimensions for all Luminar STAND ALONE Gas Log Fires (All dimensions in millimeters)
Luminar MODEL
LC-1000F
LC-2000F
LC-3000F
I M P O R T A N T
The installation of any ILLusion Gas Log Appliance must be performed only by authorised personnel and in accordance with the
manufacturer's installation instructions, local gas fitting regulations, municipal building codes, electrical wiring regulations, AS
5601 Gas Installations and any other statutory regulations.Please read these instructions carefully before proceeding.
PRIOR TO INSTALLATION
It is highly recommended that the installation of any ILLusion Gas Log appliance is planned on paper before installation begins.
This will ensure correct performance of the unit and eliminate potential problems.
Your ILLusion sales representative can advise on the best position to maximize the performance of the appliance.
In most cases, an Authorised ILLusion Installer can be arranged to install the unit, however if this is not possible, a suitably
qualified gas fitter must be used. These appliances are not designed to be installed by the homeowner.
Australian Made Gas Log Fires
External dimensions for all Luminar Inbuilt Gas Log Fires (All dimensions in millimeters)
Width(A)
Height (B)
525 (Fascia)
565 (Fascia)
610 (Fascia)
595 (Fascia)
(B)
Width(A)
Width 845
Width 945
Width1045
ALL DIMENSIONS IN MILLIMETRES
(E)
Height of Rear
Depth Of Rear
Casing (C)
Casing (D)
490
415
535
415
575
415
570
415
(A)
Height (B)
Height 725 (Inc.Pedestal)
Height 745 (Inc. Pedestal)
Height 785 (Inc. Pedestal)
3
(D)
(F)
Width Of Rear
Casing (E)
Vertical Flue model (F)
685
785
885
1250
(C)
Height of Rear
Casing (C)
n/a
470 (Overall)
n/a
470 (Overall)
n/a
470 (Overall)
LCSII-LUMINAR SERIES OCT 2015
(C)
Depth to Flue Centre
from Fascia Front -
320
320
320
320
Depth (D)
Advertisement
