Advertisement
Australian Made Gas Log Fires
THERMOSTATICALLY CONTROLLED FAN
Your new Gas Log Fire is fitted with a THERMOSTATICALLY CONTROLLED fan.
EXPLANATION
What this means is that other than initially setting the fan to the desired position,ie: Low or High, it
will no longer be necessary to turn the fan on or off whilst the unit is operating.
STARTUP
The new thermo switch will automatically turn the fan on when the heater has reached a
predetermined temperature. This will usually be 5 to 10 minutes after the heater is turned on.
It is important that the owner knows that there is nothing wrong with the heater, in fact it is much
more convenient and energy saving method of operating the fan.
SHUT DOWN
It will also shut down the fan 5 to 10 minutes after the heater is turned off, once the firebox has
cooled sufficiently.
REMOTE CONTROLLER OPTION
The above features apply even if the unit is fitted with a new OPTIONAL remote controller. If
the remote control is used to turn the appliance on, the fan will startup when the unit reaches
temperature (5 to 10 minutes). If the remote controller is used to turn the heater off, the fan will
shut down when the heater has cooled. (5 to 10 minutes). If the remote control is set to turn off the
appliance at a specified time, the fan will continue to operate until the firebox has cooled, again
usually 5 to 10 minutes. The fans speeds can still be adjusted manually (Hi or Low) whilst the unit
is operating.
16
LCSII-LUMINAR SERIES OCT 2015
Advertisement
