Advertisement
V I E W I N G T H E S A V E D R E A D I N G S ( M E M O R Y F U N C T I O N )
Turn off the monitor once with "START/STOP" KEY when the results are displayed after a
measurement.
Refer to page 1 for memory function.
1
TOUCH MEMORY KEY.
Touch MEMORY KEY [1] to review readings saved in the memory bank [1] and MEMORY
KEY [2] to review those in the bank [2].
The average of the saved readings are displayed.
Note: Average will not be displayed unless there are two or
more readings saved.
2
TOUCH THE SAME MEMORY KEY AGAIN.
The latest reading saved in the selected bank is displayed.
The display at the top shows memory number,
measurement date and time alternately. The latest reading
is displayed as memory "No. 1".
The results are recalled from the latest to the oldest with
operation of MEMORY KEY.
The bigger memory number indicates the older number.
T R O U B L E S H O O T I N G
Blood pressure is extremely high or low.
???
The monitor is not adjusted to your heart. Adjust the monitor to the height of your
heart.
Measurement is not taken with correct posture or the cuff is wrapped incorrectly.
Reconfirm the measurement procedures.
The reading was effected from moving or talking. Remain still and quiet during
measurement.
Measurement was taken right after exercise or other activities influencing the reading.
Measure again after resting for more than 5 minutes. See TIPS ON TAKING
YOUR BLOOD PRESSURE.
Measured values vary all the time.
???
Mental and physical condition or measurement condition is influencing blood pressure.
Make measurement under the same condition.
Measured value is different from that taken at a hospital.
???
Mental condition such as nervousness at a hospital or relaxed feeling at home is
influencing blood pressure. Take records of blood pressure taken at home and
consult with your doctor.
Blood pressure is changing 24 hours a day in relation with mental and physical conditions. Eating,
drinking, smoking, exercising or bathing will alter blood pressure. Blood pressure will be also
influenced by mental condition such as feeling tensed or relieved and health condition It is
important to know the tendency of blood pressure by making measurement regularly. Make your
own rules including conditions and time to make measurement and take blood pressure everyday.
[
] symbol is displayed again in the course of inflation and deflation and inflation of the
cuff are repeated.
When the initial pressure was too high for blood pressure to be taken or if you move or
strain your arm or hand, the cuff is inflated again. Deflation and inflation of the cuff are
repeated until blood pressure is taken. This does not indicate any problem or malfunction of
the monitor. Do not move or speak during measurement.
is displayed.
Batteries are weak. Replace all batteries with new ones.
Nothing is displayed.
???
Batteries are depleted. Replace all batteries with new ones.
Batteries are inserted incorrectly. Reinsert the batteries correctly.
Battery terminals are not clean. Clean the terminals with dry cloth.
AC adaptor is not connected. Connect AC adaptor.
Touching the keys with tip of finger or nail is touching the key. Touch the key with the
plane of your finger.
W A R R A N T Y
This equipment is guaranteed for the period of 1 year after the date of purchase against manufacturing defects when returned along with the proof of date of purchase to the dealer from whom the purchase was made. During this period, the unit will be
repaired or replaced free of charge if the failure is attributable to faulty design or manufacture. This warranty does not cover damage or malfunctions caused by improper handling or use contrary to the instructions in this manual. Please contact your
dealer for additional warranty provisions which may remain effective after the manufacturer's warranty period has expired.
Manufacturer :
NIHON SEIMITSU SOKKI CO., LTD.
2508-13 Nakago Shibukawa Gunma 377-0293 Japan
web site http://www.nissei-kk.co.jp/english/
: Average
NUMBER OF
SAVED RESULTS
-4-
3
TURN OFF THE MONITOR.
Touch "START/STOP" KEY..
Even if you do not turn off the monitor, it displays the result for approximately 30 seconds and will turn
off automatically.
DELETING SAVED READINGS
1
DISPLAY THE READING TO DELETE.
Display the average reading to delete entire readings in the memory.
2
TOUCH MEMORY KEY AND KEEP YOUR FINGER TOUCHED TO THE KEY.
Touch MEMORY KEY [1] to delete reading in the memory bank [1] or MEMORY KEY [2] to delete
reading in the bank [2].
The display will start flashing. Keep your finger on the key until the reading is replaced with "
SWITCHING MEMORY BANKS
Touching MEMORY KEY [2] at display of reading in the bank [1] will switch the display to reading
in bank [2] and touching MEMORY KEY [1] again will return to the display of result in the bank [1].
Inflation is repeated.
???
The cuff is inflated again if sudden change of pressure, which could be due to movement or
straining of arm or wrist, was detected. Inflation is repeated until blood pressure is taken.
Repeated inflation is not a malfunction of the monitor. Do not move or speak
during measurement.
[Err-300] is displayed.
Over pressure: blood pressure could not be taken due to moving or speaking although the
cuff was inflated to the maximum pressure. Do not move or speak during
measurement.
[Err-1] is displayed.
Blood pressure could not be taken due to moving or speaking. Do not move or speak
during measurement.
[Err-2] is displayed.
The cuff is not securely connected to the monitor. Secure the air connector. The cuff is
not wrapped appropriately. Reconfirm how to put the cuff on your arm.
Clock is not displayed.
???
The clock is inactivated. NOTE: Clock is inactivated when batteries and/or AC adaptor
are/is removed. Adjust date and time and activate the clock.
Measurement date and time are displayed with "
???
The clock is not activated. Adjust date and time and activate the clock.
Measurement was taken before the clock was activated. Measurement date and time
cannot be saved without clock being activated.
[0 0] is displayed.
"START/STOP" KEY was being touched when batteries are being installed or when AC
adaptor is being plugged in. Turn off the monitor once with "START/STOP" KEY.
Cuff end is loosened.
Put the cuff with its hook and loop
fastener side down. Put the cuff
end through the metal ring. Fold
back the cuff at the metal ring.
If you cannot get correct measurement with the methods above, contact your dealer.
Do not disassemble or tamper with the internal mechanism.
" and "
".
metal ring
hook and loop fastener
".
Advertisement
